(Photo from the Internet, censored)

The maintenance method of the cabinet

(1) The overall maintenance of the cabinet

The panels and countertops of the cabinets should use different cleaning methods according to 

different materials (quartz stone, artificial stone, stainless steel, fire board, natural stone, logs, etc.).

Try not to dye items directly on the table, these chemicals have a certain erosion effect on the 

general countertop, such as salt on the stainless steel countertop will lead to corrosion and rust, 

so also try to avoid direct oil and salt sauce vinegar directly on thetable, if the cabinet countertop 

is artificial plate, the surface is stained with water should be wiped in time, Lest infiltration cause 

expansion deformation.

(2) Maintenance of cabinet hardware components

All hardware parts on the cabinet should be kept clean, and the place with water stains should be 

dried in time to avoid rust. The hinge of the cabinet and the slide of the drawer are best oiled 

frequently to keep the opening and closing smooth. It is best not to hang things on the handle, 

especially some heavy or wet things, if the handle is loose, you can 

use a screwdriver to twist the screw on the back of the door panel. When the door is not neat 

or some loose, you can adjust the hinge, and the hinge used in the market can generally be 

adjusted in three dimensions.

(3) Kitchen kitchen basin maintenance

Stainless steel pool in the scrubbing time do not use steel wire ball and other hard objects to rub, 

do not use chemical items to wipe, use a towel or soft cloth with water to wipe or use neutral 

detergent, otherwise it will lead to scratches on the surface of the pool, resulting in corrosion 

of the pool.

For other materials of the dish basin, you can use detergent or soapy water to wash away greasy,

to keep clean. Of course, we should also pay attention to try not to use hard cleaning items to 

friction cleaning. Every time when cleaning the vegetable basin, the neck end of the tube behind 

the filter box of the basin should also be cleaned at the same time, if not cleaned for a long time, 

the oil dirt above will accumulate more and more, it is not easy to clean, and it also breeds bacteria.

(Photo from the Internet, censored)

What are the precautions for cabinet maintenance

(1) Solid wood or solid wood veneer door panel maintenance, avoid close to heat sources, power sources, 

water sources, to avoid direct sunlight. Generally the best cleaning is to wipe with a wet leather cloth, in 

the case of cleaning agents must be used, choose a mild cleaning product, and then wipe with water and 

dry. In order to avoid dry cracking, you can choose to maintain the cleanin wax wipe during maintenance. 

But also should avoid the use of nitrate or artificial synthetic resin products, otherwise it will cause harm 

to the kitchen utensils.

(2) The door surface to prevent sharp scratches, moisture-proof, can not be a long time there are water 

droplets on the door, to prevent soaking the door; The wipe can be treated with detergent and soap, 

and should not use diluent and alcohol. Gelatinousthings stick to the door panel can be gently wiped 

with maintenance cleaning wax; If necessary, a small amount of alcohol can beused (can not use alcohol 

with painted door panels) with cotton cloth or towel to wipe the door panel,can not use steel ball; Do 

not touch the door panel with caustic agents such as concentrated acid and alkali.

(3) Cabinet shelf Pay attention to the position of the plate clamp (or shelf pin) is correct. Try to choose 

to place heavy objects in the lower cabinet, the upper cabinet is suitable for placing light items, 

such as seasoning jars and glasses, etc., clean utensils wipe dry before putting in.

The above is the introduction of the relevant knowledge of cabinet cleaning and maintenance, hoping to 

help you.